Store Hours:
Monday - Saturday: 7:30AM - 8:00PMSunday: 9:00AM - 6:00PM
Dr Ike's Home Center
Currently shopping at North Laredo
From the Foundation to the Decoration
BrassCraft CSSC21-24 P
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
| Connection Type | : | FIP x MIP |
| Finish | : | Polymer-Coated |
| Inside Diameter | : | 1/2 in |
| Length | : | 24 in |
| Material | : | Stainless Steel |
| Nominal Size | : | 3/4 in |
| Operating Temperature | : | -40 to 150 deg F |
| Outside Diameter | : | 5/8 in |
| Pressure Rating | : | 0.5 psi |
- 1/2 in ID (5/8 in OD) corrugated stainless steel with corrosion-resistant coating
- Use with natural, manufactured, mixed and liquefied petroleum gases and LP gas-air mixtures
- ProCoat coating is corrosion-resistant to harsh chemicals as well as UV rays and salt
- Smooth, burnished connector ends seal with less torque, making installation easier
- High tensile strength stainless steel is less susceptible to work hardening
- Deep corrugations enhance flexibility and maneuverability of connector during installation
- Gas connector is 100% leak tested
- Approved for indoor and outdoor use
- Designed, machined and assembled in the USA
Catalog